Ver19-SP3.2 SheetWorks for Unfold (Addin) 64bit Patch Version Installation Procedure
                                                                                       2017/12/25
                                                                         AMADA HOLDINGS CO., LTD.
					
   ***** Improvements <Patch ID:171225-4160> *****


	[Unfold Condition Parameters]

	  [Spline Curve Split] is newly added in [Unfold Condition] - [Adjustment Shape] to enhance the Change Spline to Circular Arc precision.

	[Auto Dimension]

	  Improved layout of dimensions while they are inserted by Auto Dimension.

	[Create Tube Unfold]

	- afpd1997
	  Fixed an issue of Create Tube Unfold when Fix All is applied in a drawing document.

	[Positioning Notch]

	- afpc9572
	  Fixed an issue that mistakenly created faulty shapes in Multi-body while running Positioning Notch.

	- afpd2017
	  Fixed an issue that deformed shape of parts by selecting Triangle while running Positioning Notch.

	- afpd2327
	  Fixed an issue that mistakenly movied bodies resulting in errors while running Positioning Notch which is pinned.

	[Positioning Dimple]

	- afpb9342,afpc9051
	  Fixed an issue that failed to create positioning dimples.

	[Unfold Condition - Adjustment Shape]

	- afpd2382
	  Fixed an issue of Change Spline to Circular Arc that partly created lines by mistake.

	- afpd2383
	  Fixed an issue of Change Spline to Circular Arc that interrupted processing.

	[Create Sheet Metal Solid]

	- afpd3072
	  Fixed an issue that showed an original assembly at the top right after running Create Sheet Metal Solid.

	- afpd3674
	  Fixed an issue that mistakenly created surface models.

    ***** Installation Precautions ****

  (1) Close SOLIDWORKS before starting installation.

  (2) This patch file is effective for the target software and version only.
      Confirm that the target software and version is installed.

  (3) The target software is SheetWorks for Unfold (Addin).

  (4) This patch is NOT effective for SheetWorks for Unfold (Embedded), SheetWorks for Design, and SheetWorks for Tube.

  (5) The target software version is [Ver19-SP3.0 (19.3.0.1)] to [Ver19-SP3.1 (19.3.1.1)].

  (6) The version number will be [19.3.2.1] after installation.


    ****** Installation Procedure ************

  (1) Close SOLIDWORKS in the installation destination machine.

  (2) Run [V19SP3.2Patch_Unfold_Addin_64.exe].

  (3) Proceed installation according to the dialog.

�@* If the [Program Compatibility Assistant] window appears while installing, select either 
[This program installed correctly] or [Cancel].