Ver17-SP0.2 SheetWorks for Unfold (Addin) 64bit Patch Version Installation Procedure
					Amada CO., LTD. 
   ***** Improvements *****


	[Analyze Shapes]
	- afpc2884
	  Fixed an issue of data conversion process that caused crash.

	[Create Sheet Metal Solid]
	- afpc2304/afpc3046
	  Fixed an issue that failed to create sheet metal solid models.
        - afpc2456              
          Fixed an issue that failed to create reference lines correctly.         
        - afpc3607              
          Fixed an issue that caused application failure while changing a material name for a part if the option [Multi Parts] is selected.   
        - afpc3611              
          Fixed an issue that showed cut line option [Face Extrusion] as [Both Side] by mistake.       
        - afpc3639              
          Fixed an issue that made arrows for defining thickness direction show even after running cancel.

	[Create Unfold Drawing]
	- afpc2962              
          Fixed an issue of bending face determination process that failed to recognize bends correctly.      
        - afpb9926/afpc1325/afpc2642/afpc2974/afpc3149          
          Fixed an issue of flat parts creation.           
        - afpc3740              
          Fixed an issue of Bend Relief hole that failed to create a shape correctly if [Bend Relief Diameter] > [Value] is selected.   

	[Batch Unfolding Process]
	- afpc1905/afpc2795             
          Fixed an issue of Analyze Shapes process that failed to create correct flat parts.       
        - afpc3420              
          Improved not to crash but to run the cancel process in case the system behavior gets unstable due to memory overflow while running batch process. 
                
	[Auto Dimension]
	- afpc3672              
          Fixed an issue that failed to show flange dimensions correctly if the option [Insert dimension to true dimension view] is selected.   

	[Define Structural Steel Attribute]
	- afpc3664/afpc3743             
          Fixed an issue that failed to recognize [width] and [height] of structural steel correctly. 


    ***** Installation Precautions ****

  (1) Close SolidWorks before starting installation.

  (2) This patch file is effective for the target software and version only.
      Confirm that the target software and version is installed.

  (3) The target software is SheetWorks for Unfold (Addin).

  (4) This patch is NOT effective for SheetWorks for Unfold (Embedded), SheetWorks for Design, and SheetWorks for Tube.

  (5) The target software version is from [Ver17-SP0.0 (17.0.0.1)] to [Ver17-SP0.1 (17.0.1.1)].

  (6) The version number will be [17.0.2.1] after installation.


    ****** Installation Procedure ************

  (1) Close SolidWorks in the installation destination machine.

  (2) Run [V17SP0.2Patch_Unfold_Addin_64.exe].

  (3) Proceed installation according to the dialog.

�@* If the [Program Compatibility Assistant] window appears while installing, select either 
[This program installed correctly] or [Cancel].