Tonnage
20 metric / 22 U.S.
Press Drive System
Single motor AC servo drive
Maximum Stroke Length
42 mm / 1.65˝
Maximum Thickness
(see material, weight
restrictions below)
3.2 mm / 0.12˝ (standard brush table)
6.4 mm / 0.25˝ (high density brush table - OPTIONAL
Travel Range (w/o reposition)
1270 mm x 2500 mm / 50˝ x 98.4˝
1270 mm x 1270 mm / 50˝ x 50˝
Maximum Feed Rate
X axis: 80 m per min. / 3,150˝ per min. • Y axis: 60 m per min. / 2, 362˝ per min.
Maximum Weight of Material
50 kg / 110 lbs. (F1 speed) • 150 kg / 331 lbs. (F4 speed)
Maximum Hit Rate
X Axis 350 HPM • Y Axis 280 HPM (on 1˝ pitch at 0.118˝ stroke)
900 HPM (at 0.019˝ pitch and 0.055˝ stroke) for marking pattern
X Axis 370 HPM • Y Axis 275 HPM (on 1˝ pitch at 0.118˝ stroke)
900 HPM (at 0.019˝ pitch and 0.055˝ stroke) for marking pattern
Punching Accuracy
± .1 mm / 0.004˝ and ± .07 mm / 0.002˝ (Fine Accuracy mode)
Turret Rotation Speed
30 rpm
Auto-Index Rotation Speed
60 rpm
NC Control
AMNC/PC
Power Requirement
19 kVA
Maximum Air Consumption
750 NI/min. / 2.7 cubic feet
Mass of Machine
13 metric tons / 28,660 lbs.
12 metric tons / 26,400 lbs.