Pulsar 2415NT Standard Features
The Pulsar 2415NT 2,500W (4,000W optional) Production Laser System continues the latest developments in machine, CNC and laser resonator technologies. In contrast to the traditional “jack-of-all-trades” laser cutting machine, the Pulsar 2415NT is a specialist in high production of short run sheet metal parts.
- Synchronized stainless steel rollers and a high speed capacitive head provide high throughput of scratch-free stainless and aluminum parts.
- Stealth clamps reduce dead zones and maximize material utilization.
- Full machine width work chute automatically unloads large parts and allows flexibility in the location of the lead-in/lead-out points. The machine configuration allows several parts to be unloaded simultaneously, increasing throughput.
- The high speed CNC incorporates a cutting data library and available network interface. The advanced, turbine driven, RF excited, fast axial flow CO2 laser automatically calibrates itself at power-up, ensuring parameter repeatability.
- Requires less than half the floor space of previous generation Production Laser Systems, with the material moving in only one direction, the laser mounted on the frame and a pendant mount control system.
|
 |
Technical Specifications
| Motion Package |
| Travel Method |
X axis for work piece movement, Y axis for cutting head movement |
| Control Method |
X, Y & Z simultaneous 3 axis control and B axis |
| Drive Motors |
FANUC AC Servo (X, Y, Z, and B) |
| Maximum Sheet Size |
61" (Y) x 198" (X) with one repositioning cycle |
| Maximum Axis Travel |
61" (Y) x 99" (X) x 11.8" (Z) x 0.78” (B) |
| Maximum Cutting Speed |
787 IPM |
| Maximum Table Speed |
3,149 IPM per axis (4,454”/min. 45° vector) |
| Maximum Speed Z-Axis |
2,362 IPM |
| Positioning Accuracy |
±0.0004"/20" |
| Repeatability |
±0.0004" |
| Maximum Material Weight |
727 lbs. (5’ x 10’ x 3/8” or 4’ x 8’ x 1/2”) |
| Number of Clamps |
3 |
| Work Chute |
66” (Y) x 21” (X) |
| Assist Gas |
Automatic 4 ports with NC pressure Control |
| Machine Size |
222.0” x 112.0” x 86.5” |
| Machine Weight |
17,000 lbs. including laser resonator |
| Electrical Requirements |
208 VAC, 3 phase, 60 Hz |
| Laser Power |
2500 or 4000 watts |
| CNC Controller |
| Model |
AMNC-F |
| Display |
LCD Color Graphics Display |
| Control Function |
X, Y, Z-Axis Simultaneous and Focus Lens B-axis, and Laser Power control (CW, Gated Pulse, Pierce Routines etc.). |
| Data Input Method |
Touch screen, Keyboard, Ethernet, Wireless, CD, USB, 3½" Floppy disk |
| Minimum Command Unit |
0.0001" (X, Y, Z) |
| Minimum Travel Unit |
0.0001" (X, Y, Z) |
| Standard Memory |
1 MB |
| Optional Memory |
2 MB |
| Hard Drive |
10 GB |
| Operating Modes |
Automatic and Manual |
| Display Modes |
Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self Diagnostics |
| Interlock Displays |
Cooling Water Status, Gas Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Mirror, Cover Interlock |
| Electrical requirements |
See Motion Package |
|
