Pulsar 1212NT Standard Features
The Pulsar 1212NT 2,500W (4,000W optional) Production Laser System continues to combine the latest developments in machine, CNC and laser resonator technologies. In contrast to the traditional “jack-of-all-trades” laser-cutting machine, the Pulsar 1212NT is a specialist in high production of short run sheet metal parts.
- Synchronized stainless steel rollers and a high speed capacitive head provide high throughput of scratch-free stainless and aluminum parts.
- Stealth clamps reduce dead zones and maximize material utilization.
- Full machine width work chute automatically unloads large parts and allows flexibility in the location of the lead-in/lead-out points. The machine configuration allows several parts to be unloaded simultaneously, increasing throughput.
- The high speed CNC incorporates a cutting data library and available network interface. The advanced, turbine driven, RF excited, fast axial flow CO2 laser automatically calibrates itself at power-up, ensuring parameter repeatability.
- Requires less than half the floor space of previous generation Production Laser Systems, with the material moving in only one direction, the laser mounted on the frame and a pendant mount control system
|
 |
Technical Specifications
| Motion Package |
| Travel Method |
X axis for work piece movement, Y axis for cutting head movement |
| Control Method |
X, Y & Z simultaneous 3 axis control and B axis |
| Drive Motors |
FANUC AC Servo (X, Y, Z, and B) |
| Maximum Sheet Size |
50.0" (Y) x 100.0" (X) with one repositioning cycle |
| Maximum Axis Travel |
50.0" (Y) x 50.0" (X) x 11.8" (Z) x 0.78” (B) |
| Maximum Cutting Speed |
787 IPM |
| Maximum Table Speed |
3,149 IPM per axis (4,454 IPM 45° vector) |
| Maximum Speed Z-Axis |
2,362 IPM |
| Positioning Accuracy |
±0.0004"/20" |
| Repeatability |
±0.0004" |
| Maximum Material Weight |
484 lbs. (4’ x 8’ x 3/8” or 4’ x 6’ x 1/2”) |
| Number of Clamps |
2 |
| Work Chute |
58” (Y) x 21” (X) |
| Assist Gas |
Automatic 4 ports with NC pressure Control |
| Machine Size |
123.0” x 100.0” x 86.5” |
| Machine Weight |
12,232 lbs. including laser resonator |
| Electrical Requirements |
208 VAC, 3 phase, 60 Hz |
| Laser Power |
2500 or 4000 watts |
| CNC Controller |
| Model |
AMNC-F |
| Display |
LCD Color Graphics Display |
| Control Function |
X, Y, Z-Axis Simultaneous and Focus Lens B-axis, and Laser Power control (CW, Gated Pulse, Pierce Routines etc.). |
| Data Input Method |
Touch screen, Keyboard, Ethernet, Wireless, CD, USB, 3½" Floppy disk |
| Minimum Command Unit |
0.0001" (X, Y, Z) |
| Minimum Travel Unit |
0.0001" (X, Y, Z) |
| Standard Memory |
1 MB |
| Optional Memory |
2 MB |
| Hard Drive |
10 GB |
| Operating Modes |
Automatic and Manual |
| Display Modes |
Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self Diagnostics |
| Interlock Displays |
Cooling Water Status, Gas Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Mirror, Cover Interlock |
| Electrical requirements |
See Motion Package |
|
