LC-3015F1NT Standard Features
- Faster piercing and cutting by using linear drives in all three axes
- Superb cutting quality with sharp corners over the full thickness range
- High productivity at lower running costs through our ECO cut process
- Stable cutting and increased productivity using WACS™ (Water Assisted Cutting System)
- Twin-Adaptive Optics to eliminate the need for lens changing
- Cut Process Monitoring improves process time and part quality by pierce detection and by monitoring cut process
- Flexible design options: a fully accessible enclosure and choice of right- or left-hand layout
Automation in a Variety of Configurations
The LC-3015F1NT utilizes a cell system approach to automation—allowing you to select the optimum configuration best suited to your production style, fabrication process and installation space. This system approach is designed to increase machine utilization for both high-mix/low-volume production and high-volume production. The cellular design permits expansion as future needs require |
 |
Technical Specifications
| Travel Method |
Stationary table, X, Y and Z-axis movement for cutting head |
| Control Method |
X, Y and Z simultaneous 3 axis control |
| Drive Motors |
Linear |
| Maximum Sheet Size |
60" (Y) x 120" (X) |
| Maximum Axis Travel |
61" (Y) x 121" (X) x 3.94" (Z) |
| Maximum Axis Positioning Speed |
4,724"/min (6,681"/min 45° vector) |
| Maximum Speed Z-Axis |
4,724 inches per minute |
| Positioning Accuracy |
0.0004" for the entire table |
| Acceleration |
X, Y: 1.5G Z: 3G |
| Cutting head |
Cartridge-type |
| Z-axis sensor |
HS-2007 (Anti-plasma, noise resistant) |
| Maximum Material Weight |
2,000 lbs. |
| Assist Gas |
Automatic 4 ports with NC pressure Control |
| Machine Weight |
28,660 lbs. (including oscillator) |
| Electrical Requirements |
208V, 3 Phase, 60Hz |
| Laser Power |
4000 or 6000 watts |
| CNC Controller |
| Model |
AMNC-F |
| Display |
LCD Color Graphics Display |
| Control Function |
X, Y, Z-Axis Simultaneous and Focus Lens B-axis, Adaptive Optic and Laser Power control (CW, Gated Pulse, Pierce Routines etc.) |
| Data Input Method |
Touch screen, Keyboard, Ethernet, Wireless, CD, USB, 3½" Floppy disk |
| Minimum Command Unit |
0.0001" (X, Y, Z) |
| Minimum Travel Unit |
0.0001" (X, Y, Z) |
| Standard Memory |
2 MB |
| Hard Drive |
10 GB |
| Operating Modes |
Automatic and Manual |
| Display Modes |
Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self Diagnostics |
| Interlock Displays |
Cooling Water Status, Gas Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Door Open, WACS |
|
