The AC255/2510NT Series
The AC-NT Series enables fabricators to greatly increase punching speeds—and combined with innovative tooling designs—performs functions that would normally have to be done as secondary operations. Some of these include: high-speed contouring, burr-free slotting, high-speed marking, and complex forming that would normally have to be done by press brake. These expanded functions are a fulfillment of Amada¹s ongoing commitment to develop machine tools that enhance productivity and reduce secondary operations. |
AC255/2510NT Series Standard Features
- The AC-NT series utilizes an AC servo motor to drive the ram (eliminating the hydraulic power supply and chiller
- Electrical consumption is less than one-half of comparable hydraulic machines
- Higher positioning speed improves productivity
- Space-saving design takes the cost of valuable floor space
- The AC-NT offers significantly faster punching speeds than mechanical turrets
- Brush table design provides scratch-free processing, eliminating secondary finishing, and also minimizes noise during positioning
- Free-standing, PC-based network CNC Control allows for flexible layout
- Connectivity with your entire shop through the machine's NT-based controller, instantly access part programs, multi-media help files and production schedules
- Power vacuum slug pull system (patent pending) virtually eliminates slug pull concerns
« Back to Turrets |
|
 |
| Tonnage |
|
22 |
|
|
| Press drive system |
Single AC servo drive |
|
|
| Stroke length |
1.65" |
|
|
| Max. thickness |
0.12" (brush table)
0.25" (ball bearings table)
|
|
|
| AC-2510NT Travel Range |
50" x 98.4" |
|
|
| AC-255NT Travel Range |
50" x 50" |
|
|
| Max. feed rate |
X : 3,150" — Y: 2,362" |
|
|
| Max. mass of material |
110 lbs. (F1)
331 lbs. (F4) |
|
|
| AC-2510NT Max. hit rate |
X Axis 370 hpm
Y Axis 275 hpm (on 1" pitch at 0.118" stroke) for punching pattern
900 hpm (at 0.019" pitch and 0.055" stroke) for marking pattern
|
|
|
| AC-255NT Max. hit rate |
X Axis 390 hpm
Y Axis 275 hpm (on 1" pitch at 0.118" stroke) for punching pattern
900 hpm (at 0.019" pitch and 0.055" stroke) for marking pattern
|
|
|
| Punching accuaracy |
±0.003" and ±0.002"
(FA mode) |
|
|
| Turret rotation speed |
30 rpm |
|
|
| Auto-Index rotation speed |
60 rpm |
|
|
| NC control |
AMNC/PC |
|
|
| Power requirement |
19kVA |
|
|
| Max. air consumption |
75NI/min |
|
|
| AC-2510NT Machine mass |
26,000 lbs. |
|
|
| AC-255NT Machine mass |
24,000 lbs. |
|
