Press Brake
Tonnage (US)	240
Open Height	23.4"
Stroke	9.8"
Maximum Bend Length	161.4"
Distance Between Frames	148"
Backgauge	(8) axes including L-Shift
Oil Capacity	32.4 gal.
Max. Approach Speed	8.7"/sec.
Max. Bending Speed	0.78"/sec.(max) programmable
Max. Return Speed	9.8"/sec.
Control	AMNC-3i

Automatic Tool Changer (ATC)
Tool Style	AMTS ATC
Punch Stockers	18
Die Stockers	25
ATC Location	Right hand
Max. Tool Layout Length	157.5"
Minimum Tool Pitch	0.196"
"V" Range	0.157" – 1.57"
Punch Reversal Unit	Yes
Punch Height	6.7" standard 8.7" special

Complete System
Total Length	280.5"
Total Width	134.4"
Total Height	130.7"
Total Weight	51,900 lbs.
Supply Power	41KVA
Voltage	200V
Foot Pedal	2, auto slide and remote
Bend Control	Auto Bend Indicator Slide (Dual)
Safety	Safety device, safety gate (tool change), light guard (slide pedal), PILZ PSENvip P (operation)

SF 1012TL Sheet Follower
Max. Worksheet Size	39.3" x 78.7"
Min. Worksheet Size	11.8" x 11.8"
Worksheet Thickness	0.02" to 0.24"
Max. Worksheet Mass	110.3 lb. per arm
Number of Arms	2
Follow-up Angle	40° to 48° in 0.5° increments
Follow-up Speed	• Up (automatically set): 2 to 8 sec./45° in 7 steps • Down (selected): 4 and 6 sec./45° in 2 steps
Table Height Adjustment Range	2.36" to 6.69" (total height of die holder and die)
V-Die Width	0.16" to 2.48"
Vacuum Pads	ø2.36" x 3 per arm
Drive Motor	0.2kW (0.3 HP) inverter motor with brake
Power Source	3-Phase, 200V, 2kVA (supplied from machine)
Compressed Air	73 psi (2.43 ft³/min.)
Total Weight	881.8 lbs.